What CAD Systems are supported in PC-DMIS 2011 and up?
  • Knowledgebase
  • What CAD Systems are supported in PC-DMIS 2011 and up?

    PC‑DMIS supports Direct CAD Interfaces (DCI) and Direct CAD Translators (DCT) to the following CAD systems.
    A PDF of the below table can be downloaded here.
    Note: The table is wider than shown.  Use the slider tab at the bottom of the table to scroll left or right.

      PC-DMIS 2011 PC-DMIS 2011 MR1 PC-DMIS 2012 PC-DMIS 2012 MR1 PC-DMIS 2013 PC-DMIS 2013 MR1 PC-DMIS 2014 PC-DMIS 2014.1 PC-DMIS 2015 PC-DMIS 2015.1 PC-DMIS 2016 PC-DMIS 2017 R1 PC-DMIS 2017 R2
    Acis DCI Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0 Up to v7.0
    CATIA 4 DCI - - - - - - - - - - - - -
    CATIA 5 DCI R8 - R20 R8 - R20 R8 - R21 R8 - R21 R8 - R22 R17 - R23 R17 - R23 R17 - R24 R17 - R25 R17 - R25 R17 - R25

    R17 - R2016 (R26)

    x64 PC-DMIS Only

    R17 - R2016 (R26)

    x64 PC-DMIS Only

    Pro/Engineer DCI 2002i - Wildfire 5.0 2002i - Wildfire 5.0 2002i - Creo Parametric 1.0 2002i - Creo Parametric 1.0 2002i - Creo Parametric 2.0 Wildfire 4 - Creo Parametric 2.0 Wildfire 4 - Creo Parametric 2.0 Wildfire 4 - Creo Parametric 2.0 Wildfire 4 - Creo Parametric 3.0 Wildfire 4 - Creo Parametric 3.0 Wildfire 4 - Creo Parametric 3.0 Wildfire 4 - Creo Parametric 3.0 2000i - Creo Parametric 3.0
    SolidWorks DCI 2003 - 2011** 2003 - 2011** 2003 - 2011** 2003 - 2012** 2010 SP1 - 2013** 2010 SP1 - 2014** 2010 SP1 - 2014** 2010 SP1 - 2014** 2010 SP1 - 2015 2010 SP1 - 2015 2010 SP1 - 2016 2010 SP1 - 2016 1999 - 2017
    Unigraphics DCI Up to NX 7.5 Up to NX 7.5 Up to NX 8 Up to NX 8 Up to NX 8.5 NX 6.0 - NX 9.0 NX 6.0 - NX 9.0 NX 6.0 - NX 9.0 NX 6.0 - NX 9.0 NX 6.0 - NX 10.0 NX 6.0 - NX 10.0 NX 6.0 - NX 10.0 V8.0 - NX 11.0
    CATIA 4 DCT V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.24 V4.15 - V4.25
    CATIA 5 DCT R7 - R20 R7 - R20 R7 - R21 R7 - R21 R7 - R22 R7 - R22 R7 - R23 R7 - R2014 (R24) R7 - R2015 (R25) R7 - R2015 (R25) R17 - R2015 (R25) R17 - R2016 (R26) R7 - R26 (V5-6R2016)
    CATIA 6 DCT - - - R2010x - R2011x R2010x - R2013 R2010x - R2013 R2010x - R2013x R2010x - R2013x R2010x - R2013x R2010x - R2014x R2010x - R2015x R2010x - R2015x R2010x - R2016x
    Parasolid DCT V7 - V19 V7 - V24 V7 - V24 V7 - V24 V7 - V25 V7 - V25 V7 - V26 V7 - V26 V7 - V26 V7 - V26 V7 - V28 V7 - V28 V7 - V29
    Pro/Engineer DCT 2000i - Wildfire 5.0 2000i - Wildfire 5.0 2000i - Creo Parametric 1.0 2000i - Creo Parametric 1.0 2000i - Creo Parametric 2.0 2000i - Creo Parametric 2.0 2000i - Creo Parametric 2.0 2000i - Creo Parametric 2.0 2000i - Creo Parametric 3.0 2000i - Creo Parametric 3.0 2000i - Creo Parametric 3.0 2000i - Creo Parametric 3.0 2000i - Creo Parametric 3.0
    Unigraphics DCT V10 - NX 7.5 V10 - NX 7.5 V10 - NX 8.0 V10 - NX 8.0 V10 - NX 8.5 NX 6.0 - NX 8.5 NX 6.0 - NX 9 NX 6.0 - NX 9 NX 6.0 - NX 10.0 NX 6.0 - NX 10.0 NX 6.0 - NX 10.0 NX 6.0 - NX 10.0 V8.0 - NX 11.0
    Solidworks DCT - - - - 1999 - 2013 1999 - 2013 1999 - 2014 1999 - 2014 2010 SP1 - 2015 2010 SP1 - 2015 1999 - 2016 1999 - 2016 1999 - 2017
    JT - - - - v8.0 - v9.5 v8.0 - v9.5 v8.0 - v9.5 v8.0 - v9.5 v8.0 - v10.0 v8.0 - v10.0 v8.0 - v10.0 v8.0 - v10.0 v8.0 - v10.0
    STEP - - - - - - - AP203 (Edition 1, Edition 2) AP214 (up to Edition 3) AP242 (Edition 1 pre-DIS) AP203 (Edition 1, Edition 2) AP214 (up to Edition 3) AP242 (Edition 1 pre-DIS) AP203 (Edition 1, Edition 2) AP214 (up to Edition 3) AP242 (Edition 1 IS) AP203 (Edition 1, Edition 2) AP214 (up to Edition 3) AP242 (Edition 1 IS) AP203 (Edition 1, Edition 2) AP214 (up to Edition 3) AP242 (Edition 1 IS) AP203 (Edition 1, Edition 2) AP214 (up to Edition 3) AP242 (Edition 1 IS)
    Inventor DCT - - - - - - - - - 9 - 2016 9 - 2016 9 - 2016 9 - 2017
    (Topic ID 16101-978)
    Topic Information
    • Topic #: 16101-978
    • Date Created: 09/04/2015
    • Last Modified Since: 07/27/2017
    • Viewed: 1282
    Help Desk and Customer Support Software by Parature

    Hexagon Manufacturing Intelligence

    Support Center

    250 Circuit Drive
    North Kingstown, RI 02852
    USA

    Support: 800.343.7933

    hexagonmi.com

    Shop Online 

    Contact Us